We have a couple of users who Remote Desktop into their office workstation. The network is Small Business Server 2003 and both the workstations and the computers they use at home, etc.

• Remote Client Access
• Samsung Remote Client Crack

Remote Client Access

To go into them are Windows XP Pro.One user cannot print from Remote Desktop to his local printer at home. When he tries to print, it seems to 'spool' correctly, but never prints.

The printer window says 'printing', and nothing ever happens.He has tried this with 3 different printers, all different makes and models, but still nothing. I have also seen this firsthand.I checked his settings, and it does say to connect automatically to printers, so that is not the issue.Any ideas? Please find below the solution from Microsoft for this problemPrinters That Use Ports That Do Not Begin With COM, LPT, or USB Are Not Redirected in a Remote Desktop or Terminal Services SessionView products that this article applies to.Article ID: 302361Last Review: December 20, 2004Revision: 4.4This article was previously published under Q302361SYMPTOMSWhen you use Remote Desktop Connection or the Terminal Services Client version 4.0 or 5.0 to connect to another Windows-based computer from a computer that is not running Windows Server 2003, your local printers may not be redirected. As a result, your local printers are not available in the remote desktop or terminal services session.For example, if your Windows XP-based computer has a multifunction print device using a DOT4 port, it may not be redirected in a remote desktop session to a Windows 2000- or Windows Server 2003-based computer.Back to the topCAUSEThis problem occurs because the printer port does not begin with COM, LPT, or USB. By default, printer port names that do not begin with COM, LPT, or USB are only redirected in Windows Server 2003.

Dtm race driver 3 crack 1.1 full. By default, multifunction print devices may not be redirected unless you are running Windows Server 2003 on your local computer because they use DOT4 ports.Back to the topRESOLUTIONTo resolve this problem on a computer that is not running Windows Server 2003, force all ports (including DOT4) on the client computer to be filtered for redirection. To do this, add a DWORD value named FilterQueueType to HKEYCURRENTUSERSoftwareMicrosoftTerminal Server ClientDefaultAddInsRDPDR and set its value data to FFFFFFFF.Follow these steps, and then quit Registry Editor: 1. Click Start, click Run, type regedit, and then click OK.2. Locate and then click the following key in the registry:HKEYCURRENTUSERSoftwareMicrosoftTerminal Server ClientDefaultAddInsRDPDR3. On the Edit menu, point to New, and then click DWORD Value.4.

Type FilterQueueType, and then press ENTER.5. On the Edit menu, click Modify.6. Type FFFFFFFF, and then click OK.This enables all ports on the client to be redirected.To work around this problem on a client computer that has a multifunction print device, change the port that the multifunction print device uses from DOT4 to an LPT port.For example, to configure a multifunction print device to use an LPT port on a Windows XP-based computer, follow these steps: 1. InControl Panel, openPrinters and Faxes.2. Right-click the local printer that is not redirected, and then click Properties.3. Click the Ports tab, click an LPT port, and then click Apply.The printer should now appear next to that port.4. Close the Printer Properties window, and then reconnect by using Remote Desktop.Important When a multifunction printer is using a standard LPT port instead of the DOT4 port, it loses its multifunction capabilities, such as scanning, faxing, or copying.

Samsung Remote Client Crack

To regain the multifunction capabilities, the print device must use the DOT4 port.Back to the topSTATUSThis behavior is by design.Back to the topMORE INFORMATIONTo view the port name for your printer, or to determine if the device uses a DOT4 port, view the properties of that printer, and then click the Ports(or the Details) tab.Back to the top.